المشغّل الهوائي

Product Overview

The Pneumatic Actuator is a robust, high-performance device designed for quarter-turn valve automation in process and industrial control systems. Available in rack-and-pinion and scotch-yoke configurations, it delivers reliable rotary motion to operate ball valves, butterfly valves, plug valves, and other quarter-turn devices. Its compact aluminum alloy construction offers an excellent strength-to-weight ratio, making it suitable for demanding environments across oil and gas, chemical processing, water treatment, and power generation industries.

Operating Principle

Rack-and-Pinion Mechanism

In the rack-and-pinion design, compressed air drives one or two pistons linearly along the cylinder bore. The pistons are connected to a toothed rack that meshes with a central pinion gear. As the pistons travel, the rack converts linear motion into 90° of rotary output at the pinion shaft. This mechanism produces consistent torque throughout the stroke and is well-suited for smaller to medium torque requirements (typically up to several thousand Nm).

Scotch-Yoke Mechanism

The scotch-yoke design uses a sliding yoke connected to a crank pin on the output shaft. As the piston moves linearly, the yoke converts this motion into rotation. The geometry of the scotch-yoke mechanism produces higher torque at the beginning and end of the stroke — precisely where valve seating and unseating forces are greatest. This makes it the preferred choice for large-bore valves and high-torque applications up to 30,000 Nm.

Configuration Options

Double-Acting

In double-acting configuration, compressed air is applied alternately to both sides of the piston to drive opening and closing strokes. This provides maximum torque output in both directions and is ideal for applications where a reliable air supply is always available. Double-acting actuators offer precise control and are commonly used in automated process lines.

Spring-Return

Spring-return (single-acting) actuators use compressed air to drive the actuator in one direction, while one or more internal springs return the actuator to its fail-safe position upon loss of air supply. The fail-safe position — either fail-open or fail-closed — is determined by spring orientation. This configuration is essential for safety-critical applications where a defined valve position must be maintained during power or air failure.

Materials and Construction

The actuator body is manufactured from high-strength aluminum alloy, providing excellent corrosion resistance and a lightweight profile without compromising structural integrity. End caps, pistons, and internal components are precision-machined for tight tolerances and long service life. An anodized surface finish further enhances corrosion resistance, making the actuator suitable for outdoor and chemically aggressive environments. Seals are available in NBR, EPDM, or Viton to accommodate a wide range of process media and temperature conditions.

Mounting Standard: ISO 5211

All actuators feature an ISO 5211 direct mounting pad on the output shaft, enabling tool-free, bracket-free direct mounting to compatible valves and accessories such as solenoid valve manifolds, positioners, and limit switch boxes. This standardized interface simplifies installation, reduces assembly time, and ensures interchangeability across manufacturers.

Air Supply Requirements

The actuator operates on a standard instrument air supply of 4–8 bar (58–116 psi). Clean, dry, filtered air is recommended to maximize seal life and prevent internal corrosion. A filter-regulator-lubricator (FRL) unit is advised upstream of the actuator in most installations. The actuator is compatible with nitrogen gas supply where instrument air is unavailable.

Torque Output Range

The product range covers torque outputs from 10 Nm for small instrumentation valves up to 30,000 Nm for large-bore pipeline valves. Torque output is a function of actuator size, supply pressure, and mechanism type. Sizing should account for valve breakaway torque, running torque, and an appropriate safety factor (typically 1.25–1.5×).

Typical Applications

Pneumatic actuators in this range are widely deployed across:

• Oil and gas production, refining, and pipeline systems
• Chemical and petrochemical processing plants
• Water and wastewater treatment facilities
• Power generation and utilities
• Food and beverage processing
• HVAC and building automation systems

Maintenance Notes

Pneumatic actuators are designed for minimal maintenance. Periodic inspection should include checking air supply connections for leaks, verifying end-stop adjustment screws are correctly set, and inspecting external seals for wear or damage. Seal replacement kits are available for all actuator sizes. Internal lubrication is factory-applied and typically does not require field replenishment under normal operating conditions. For spring-return models, spring cartridge integrity should be verified during scheduled maintenance intervals.