The FR-COV-11612 is a 100% inherent flame-retardant cotton coverall certified to EN ISO 11612, EN 470, and EN 531 standards, delivering permanent protection that cannot wash out or degrade over time. Engineered for professionals in oil & gas, utilities, petrochemical, and industrial environments, this full-body one-piece garment provides reliable defence against flash fire and thermal hazards. Its inherent FR cotton construction — free from chemical treatments — ensures consistent, long-lasting safety performance in high-risk flame environments.
This 100% cotton inherent flame-retardant coverall is engineered to meet EN ISO 11613, EN 470, and EN 531 standards, delivering firefighter-grade protection for demanding fire environments. Offering a higher protection level than EN ISO 11612, it is purpose-built for firefighting and proximity fire work where maximum flame resistance is critical. The full-body coverall design ensures comprehensive coverage, with inherent FR properties that remain effective through repeated laundering.
01
EN ISO 11613, EN 470 & EN 531 certified (firefighter-grade spec)
Engineered for professionals working in flame-risk environments, these work pants are crafted from 100% cotton inherent fire retardant fabric that provides lasting protection without chemical treatments. Triple-certified to EN ISO 11612, EN 470, and EN 531, they meet the most demanding international safety standards for thermal and flame hazards. Ideal for oil & gas, utilities, and industrial workers who require reliable FR protection throughout long shifts.
01
Triple certified to EN ISO 11612, EN 470, and EN 531 flame protection standards
02
100% cotton inherent FR fabric — protection built into the fibre, not a finish
03
Durable work trouser cut designed for comfort and freedom of movement
Designed for oil & gas, utilities, and industrial workers who require reliable flame protection without the bulk of a full coverall, this 100% cotton FR work shirt delivers inherent flame resistance that cannot wash out or wear away. Certified to EN ISO 11612, EN 470, and EN 531, it meets the most demanding occupational safety standards for heat and flame hazards. A practical, compliant choice for professionals working in high-risk environments where lightweight, everyday FR protection is essential.
5K/10K Marine Valves are heavy-duty bronze and cast iron valves engineered for demanding seawater, marine cooling, and offshore piping applications. Available as gate, globe, and check valve types, they are rated to JIS 5K and 10K pressure classes in accordance with JIS B2011. Offered in screwed and flanged end connections across a size range of 1/2" to 8", these valves deliver reliable shutoff and flow control in corrosive marine environments. Their robust construction ensures long service life and compliance with international marine industry standards.
Angle-pattern globe valve for throttling and shut-off in steam, hot water, and process service where a 90° pipeline direction change is needed. Features: bronze or brass body, screwed BSP/NPT connections, renewable seat, sizes 1/4"–2", rated to 16 bar and 200°C.
Bimetallic thermometer for local temperature measurement in pipelines and vessels across oil & gas, chemical, and HVAC applications. Features: bimetallic sensing element, adjustable angle or bottom connection, SS stem and case, -40°C to +600°C, dial sizes 80–160mm, IP65.
The Black & Decker BXPG0365IN-L Anti-Vibration Gloves are certified to EN 420:2003+A1:2009 and EN 388:2016 standards, delivering professional-grade hand protection for demanding work environments. Featuring multi-layered gel and foam palm padding, these gloves effectively reduce hand-arm vibration (HAV) transmitted from power tools and heavy machinery, helping to minimize fatigue and long-term injury risk. Designed for operators of grinders, drills, jackhammers, and other vibrating equipment, they combine comfort and compliance in a single durable glove.
01
EN 388:2016 and EN 420:2003+A1:2009 certified for verified mechanical and general protection
02
Multi-layer gel and foam anti-vibration palm padding for superior HAV reduction
03
Reduces hand-arm vibration (HAV) from power tools and heavy machinery
Black & Decker BXPG0366IN Impact Resistant Mechanic Gloves are certified to EN 420:2003+A1:2009 and EN 388:2016 standards, delivering reliable hand protection across demanding work environments. Featuring TPR impact protection on the dorsal side and a cut-resistant palm lining, these gloves shield against mechanical hazards with every use. Engineered for heavy construction, mechanical maintenance, and oil & gas operations, they combine durability and dexterity for professional-grade performance.
The Black & Decker BXWB0165IN is a certified EN 20345:2011 S3 SRC HRO safety shoe engineered for demanding work environments in construction, logistics, and manufacturing. Featuring a non-metallic composite toe cap and nail-proof midsole construction, it delivers robust foot protection without adding unnecessary weight. Built with a durable black DIN leather upper, this safety shoe combines long-lasting comfort with industry-leading slip and heat resistance.
The Black & Decker BXWB0169IN is a certified EN 20345:2011 S3 SRC HRO safety shoe featuring a non-metallic composite toe cap and a premium camel-color DIN leather upper. Engineered with anti-static (ESD) protection, an SRC-rated anti-slip outsole, and HRO heat contact resistance, it delivers comprehensive foot protection in demanding environments. Ideal for petrochemical, electrical, and construction applications where safety and durability are paramount.
Heavy-duty forged alloy steel bow shackle rated to 3.25 tonnes WLL, suitable for general rigging, lifting, and towing applications across industrial, marine, and construction sectors.
Wafer or lug-type butterfly valve for flow control and shut-off in water distribution, HVAC, and industrial systems. Features: ductile iron or CS body, EPDM or NBR lining, lever or gear operator, sizes DN50–DN1200, PN10/PN16, ANSI/DIN/JIS standards.
Cam-and-groove (camlock) quick-disconnect coupling for fast connection and disconnection of hoses in fluid transfer applications. Features: aluminum, SS 304/316, or polypropylene; Type A, B, C, D, E, F, DP configurations; sizes 1/2"–6"; working pressure up to 200 psi.
Replacement circular paper charts and colored ink pens for process recorder instruments used in temperature, pressure, and flow monitoring. Available in 100mm and 250mm diameters with multiple rotation periods and ink colors to suit a wide range of industrial recording applications.
Double-ferrule compression tube fitting for leak-tight connections on instrument and process tubing in oil & gas and analytical applications. Features: SS 316 or brass body, double front and back ferrule design, tube sizes 1/8"–2" OD, metric and imperial, working pressure up to 420 bar.
The Cotton Work Gloves 30g are crafted from 100% knitted cotton, delivering lightweight, breathable hand protection ideal for light assembly, handling, and warehouse operations where dexterity is essential. Weighing just 30g, these gloves offer a comfortable fit for extended wear while absorbing perspiration to keep hands dry throughout the workday. Available in bulk supply of 400 pairs per carton, they are a cost-effective general-purpose solution for a wide range of industrial and logistics environments.
These 100% cotton knitted work gloves offer medium-weight 40g construction, delivering greater durability than the standard 30g version for demanding general industrial handling and warehouse operations. Breathable and comfortable, they absorb perspiration to keep hands dry during extended use. Available in bulk packaging of 400 pairs per carton, making them an economical choice for high-volume workplace environments.
Full-bore rising stem CPVC gate valve for on/off shut-off service in chemical and corrosive fluid piping systems. Features: CPVC body, rising stem, socket or threaded ends, sizes 1/2"–4", handwheel operated, chemical resistant, ANSI/DIN compliant.
A CPVC socket-type pipe end cap designed for sealing the ends of CPVC piping in chemical and industrial fluid systems. Manufactured from Chlorinated Polyvinyl Chloride, it offers outstanding corrosion resistance and elevated temperature tolerance. Joined using solvent cement, it provides a reliable, leak-free termination compliant with ASTM F439.
CPVC van-stone (loose backing ring) flange featuring a CPVC stub end paired with a loose steel or polypropylene backing ring, allowing the ring to rotate freely for effortless bolt alignment during installation. Compatible with both DIN and ANSI bolt circles, this flange is available in sizes DN25–DN200, making it a versatile solution for thermoplastic piping systems.
Differential pressure gauge for measuring pressure difference between two process points, used for filter monitoring, flow indication, and level measurement.
High-accuracy digital load cell (dynamometer) with 10T capacity and wireless remote display. Used for crane load testing, weighing suspended loads, and proof load verification in industrial and offshore lifting operations.
This disposable coverall is made from 35 GSM non-woven polypropylene fabric, offering lightweight yet reliable full-body protection in white. CE and ISO 13485 approved, it is ideal for industrial painting, asbestos removal, cleanroom environments, pharmaceutical manufacturing, and general contamination control. Each carton contains 50 pieces, making it a cost-effective solution for high-volume protective workwear needs.
01
CE and ISO 13485 approved for quality assurance
02
35 GSM non-woven polypropylene fabric — lightweight and breathable
The Disposable PP Mob Cap Hair Cover is made from lightweight polypropylene (PP) non-woven material, offering reliable hygiene protection across food processing, cleanroom, pharmaceutical, medical, and industrial applications. CE and ISO 13485 approved, these single-use caps meet stringent quality and safety standards. Supplied in convenient packs of 100, they deliver consistent, cost-effective contamination control.
Motorized electric chain hoist rated to 500 kg for efficient, powered vertical lifting. Features push-button pendant control and overload protection, suitable for workshops, assembly lines, and warehouses.
The EP033 Corded Foam Ear Plugs are disposable hearing protection designed for use in construction, manufacturing, and industrial environments where noise exposure is a concern. Made from soft, slow-rebound polyurethane foam, they conform to the ear canal for a secure, comfortable fit during extended wear. The attached cord keeps each pair together, reducing the risk of loss on busy job sites.
The Eyevex EP167 is an industrial over-the-head safety ear muff designed to deliver reliable hearing protection in high-noise environments. Featuring an adjustable headband with soft cushioned ear cups, it ensures comfortable extended wear across demanding applications in construction, manufacturing, and heavy industry. Made in Taiwan to consistent quality standards.
Nitrile Maxi Grip Cut Resistant Gloves deliver EN 388:2016 Cut Level 5 protection, making them ideal for high-risk environments in oil & gas, metal fabrication, and automotive industries. Featuring a sandy nitrile foam palm coating, these gloves provide exceptional grip performance in oily and wet conditions where secure handling is critical. Fully compliant with EN 420:2003+A1:2009 general protective glove requirements, the SGNC8900 combines cut resistance, durability, and comfort for demanding industrial applications.
01
EN 388:2016 Cut Level 5 certified for high-risk cut hazard protection
02
Sandy nitrile foam palm coating for superior grip in oily and wet conditions
03
HPPE cut-resistant knitted liner for lightweight, flexible protection
The Eyevex SHD028 Flockline Latex Industrial Gloves are certified to EN 420:2003+A1:2009 and EN 388:2016 standards, delivering reliable protection across a wide range of industrial applications. Constructed from heavy-duty latex with a soft cotton flock inner lining, these gloves provide exceptional comfort and effective moisture absorption during extended wear. Resistant to chemicals, oils, and water, they are ideally suited for industrial, laboratory, and food processing environments.
01
Cotton flock inner lining for enhanced comfort and moisture absorption
02
Heavy-duty latex construction for superior durability and long-lasting performance
03
Resistant to chemicals, oils, and water for broad-spectrum protection
The Eyevex SIRG9200 is a high-performance impact resistant glove certified to EN 420:2003+A1:2009 and EN 388:2016 standards, engineered for demanding industrial environments. Featuring TPR thermoplastic rubber dorsal protection with a padded knuckle guard, it delivers superior impact absorption and hand safety. Ideal for heavy equipment operation, drilling, construction, and oil & gas mechanical work.
01
EN 388:2016 and EN 420:2003+A1:2009 certified for verified protection
02
TPR thermoplastic rubber dorsal and padded knuckle impact protection
The Eyevex SPUC8900 delivers EN 388:2016 Cut Level 5 protection with a high-performance HPPE fiber liner, making it ideal for demanding applications such as sheet metal handling, glass handling, and automotive assembly. Certified to EN 420:2003+A1:2009 and EN 388:2016, these gloves combine superior cut resistance with a precision PU palm coating that ensures exceptional dexterity and grip. Lightweight and breathable, the SPUC8900 offers all-day comfort without compromising on safety performance.
01
EN 388:2016 Cut Level 5 certified for superior cut resistance
02
EN 420:2003+A1:2009 compliant for general glove safety standards
03
HPPE high-performance fiber liner for maximum cut protection
Eyevex SS138 Safety Spectacles are slim-profile polycarbonate eyewear certified to EN 166:2001 and ANSI Z87.1 standards, offering reliable protection for industrial and laboratory environments. Manufactured in Taiwan, these lightweight spectacles feature UV-protective lenses and an adjustable nose bridge for a secure, comfortable fit. Designed to fit over most prescription glasses, the SS138 combines everyday wearability with professional-grade safety performance.
01
EN 166:2001 and ANSI Z87.1 certified for industrial-grade eye protection
02
Slim-profile frame for a low-profile, unobtrusive fit
03
Polycarbonate lens with UV protection for enhanced optical safety
The Eyevex SS542 Anti-Fog Safety Spectacles deliver certified eye protection meeting both EN 166:2001 and ANSI Z87.1 standards, featuring an anti-fog polycarbonate lens for clear vision in demanding environments. Designed with a sporty frame profile and manufactured in Taiwan, these spectacles are ideal for industrial workplaces and outdoor applications. Available in clear and dark lens options, they offer reliable, comfortable protection for a wide range of users.
The Eyevex SS544 Safety Spectacles are EN 166:2001 and ANSI Z87.1 certified protective eyewear engineered for prolonged industrial use. Featuring a lightweight polycarbonate impact-resistant lens with UV protection, these spectacles deliver reliable eye safety without compromising comfort. Made in Taiwan, the SS544 combines a soft flexible temple design with a comfortable frame for all-day wearability.
The Fire Marshall FR-04 is a long-sleeve flame-retardant work shirt crafted from 100% cotton FR fabric, certified to EN 470, EN 531, and EN ISO 11612 standards for reliable arc and flame protection. Engineered for oil & gas, utilities, and industrial environments, it delivers inherent flame resistance without relying on topical chemical treatments. Made in India, the FR-04 combines durable workwear construction with the comfort of natural cotton for all-day wear in high-risk settings.
The Fire Marshall FR-05 Work Pants are crafted from 100% cotton flame-retardant fabric, delivering reliable protection for workers in oil & gas, utilities, and industrial flame-risk environments. Fully compliant with EN 470, EN 531, and EN ISO 11612 standards, these work trousers meet the most demanding occupational safety requirements. Made in India to rigorous quality standards, the FR-05 combines certified flame protection with practical workwear comfort.
01
100% cotton flame-retardant fabric for reliable, breathable FR protection
02
Certified to EN 470, EN 531, and EN ISO 11612 flame-protection standards
03
Work trouser cut engineered for all-day comfort and freedom of movement
The Fire Marshall FR-220 is a full-body, one-piece coverall crafted from 100% cotton flame-retardant fabric with inherent FR properties — no chemical treatment required. Conforming to EN 470, EN 531, and EN ISO 11612 standards, it delivers reliable protection for workers in oil & gas, utilities, and industrial environments where fire risk is a constant concern. Made in India to exacting quality standards, the FR-220 combines certified safety performance with lasting comfort for demanding worksite conditions.
Green polyester flat webbing sling rated to 2 tonnes WLL, offering a wide bearing surface to protect load surfaces while providing reliable, lightweight lifting capacity. Compliant with EN 1492-1.
Ball float valve for automatic water level control in storage tanks, cooling towers, and cisterns. Features: brass or SS body, spherical float on adjustable arm, threaded BSP/NPT connection, sizes 1/2"–4", working pressure up to 6 bar, suitable for potable water.
Heavy-duty Bourdon tube gauge for general industrial process measurement in oil & gas, petrochemical, water treatment, and manufacturing. Features: solid-front construction, liquid-fillable, SS or forged steel socket, ASME B40.1/EN837, dial sizes 100–250mm, ranges to 1000 bar.
Gauge Type
Bourdon Tube Process Gauge
Measuring Element
C-type Bourdon tube (stainless steel or copper alloy)
Single-leg Grade 80 alloy steel chain sling with master link and hook rated to 1.12 tonnes WLL. Offers superior strength, heat resistance and longevity for the most demanding industrial lifting operations.
Compact hand lever hoist rated to 750 kg WLL, capable of lifting, lowering, and pulling loads both vertically and horizontally. Ideal for rigging, tensioning, and load positioning in confined spaces.
The Heat Resistant Leather Welding Face Mask delivers full face protection against arc flash, weld spatter, and radiant heat, making it an essential shield for professional welding operations. Constructed from durable heat-resistant leather, it provides reliable coverage and long-lasting performance in demanding industrial environments. Manufactured in China and conveniently packed 50 pcs per carton for efficient procurement and distribution.
01
Heat-resistant leather construction for reliable protection in high-temperature welding environments
02
Full face coverage shields against arc flash and weld spatter
03
Effectively guards against radiant heat during welding operations
The KAISEN SHH1143 is a Class S3-SRA high ankle safety shoe certified to EN ISO 20345:2011, engineered for construction and industrial workers across GCC and Middle East job sites. It features a steel toe cap rated for 200J impact protection, an anti-penetration midsole, and an SRA-rated anti-slip outsole for reliable traction on hazardous surfaces. Made in India to international safety standards, the SHH1143 delivers robust foot protection and ankle support in demanding work environments.
01
Class S3-SRA safety rating for maximum protection
02
EN ISO 20345:2011 certified for international compliance
The KARAM AL14-9100 is a 14mm diameter polyamide twisted rope anchorage lifeline engineered for reliable fall protection in construction, scaffolding, and industrial at-height environments. Designed to meet rigorous safety standards, it delivers high tensile strength and durability as a vertical or horizontal lifeline system component. Its UV and weather-resistant construction ensures long-lasting performance in demanding outdoor conditions.
The KARAM AP013 Aluminium Double Pulley is a high-efficiency dual-sheave pulley engineered for lifting, hauling, and rescue systems in confined space entry and rope access applications. Featuring sealed ball bearings, it delivers smooth, low-friction rope travel even under demanding load conditions. Its lightweight yet robust aluminium alloy construction makes it an essential component for professional vertical rescue and rigging setups.
01
Dual sheave design provides mechanical advantage for efficient lifting and hauling operations
02
Sealed ball bearings ensure smooth, low-friction rope travel under load
03
Lightweight aluminium alloy frame offers excellent strength-to-weight ratio
The KARAM ES001 Safety Spectacles deliver reliable eye protection for construction and industrial environments, certified to EN 166:2001 and ANSI Z87.1-2010 standards. Featuring a wraparound polycarbonate lens with UV protection and an anti-scratch coating, these spectacles combine durability with all-day comfort. Manufactured in India by KARAM Safety, the ES001 is a trusted choice for professional-grade occupational eye protection.
The KARAM FAP-30199 is an ANSI/ASSE Z359.13-2013 certified Y-type forked webbing lanyard engineered for 100% tie-off fall protection on worksites. Featuring an integrated energy absorber, it significantly reduces shock loads on the user during a fall arrest event. Constructed from high-strength polyester webbing and manufactured in India by KARAM Safety, it delivers reliable, standards-compliant protection.
01
ANSI/ASSE Z359.13-2013 certified for fall protection compliance
02
Y-type double lanyard design enables 100% tie-off at all times
03
Integrated energy absorber reduces shock load during fall arrest
The KARAM FAP15502D is a full body harness certified to ANSI/ASSE Z359.1-2007, meeting rigorous American fall protection standards for demanding work environments. Featuring a dorsal D-ring for reliable fall arrest and fully adjustable high-strength polyester webbing, it delivers a secure, customizable fit across a wide range of body sizes. Designed for professionals in oil & gas, construction, and other industries where ANSI-compliant fall protection is required.
01
ANSI/ASSE Z359.1-2007 certified full body harness
02
Dorsal D-ring for reliable fall arrest attachment
03
Fully adjustable straps for a secure, customized fit
The KARAM FS246 is a high-performance safety shoe certified to EN ISO 20345:2011 S3 SRC HRO, featuring a composite non-metallic toe cap and a honey-colored Nu-Buck leather upper for superior comfort and durability. Equipped with anti-static ESD protection, a heat-insulated midsole, and an SRC-rated anti-slip outsole, it delivers comprehensive foot protection in demanding environments. Ideal for professionals in oil & gas, utilities, and construction industries.
01
EN ISO 20345:2011 S3 SRC HRO certified
02
Composite non-metallic toe cap for lightweight protection
The KARAM HS-01 Safety Gloves feature a nylon knitted shell with a full latex palm coating and crinkle finish, delivering reliable grip on both wet and dry surfaces. Certified to EN 388:2016 Cut Level 1, these gloves meet rigorous international safety standards for hand protection. Ideal for general industrial handling, construction, and assembly work, they combine durability with a comfortable ergonomic fit.
The KARAM HS-11 Safety Gloves feature a heavy-duty full latex coating over a nylon knit liner, delivering EN 388:2016 Cut Level 1 certification with outstanding abrasion resistance and reliable grip in both wet and dry conditions. Designed for demanding work environments, these gloves provide superior hand protection and dexterity for construction, warehousing, and industrial material handling applications.
HS-21 is a lightweight PU (polyurethane) palm-coated safety glove built on a nylon knit shell, certified to EN 388:2016 Cut Level 1 for reliable protection in light-duty handling environments. Its thin, form-fitting PU coating delivers exceptional dexterity and precision grip, making it ideal for electronics assembly, precision handling, and light industrial tasks. Breathable and comfortable for extended wear, the HS-21 is the go-to choice for professionals who demand tactile sensitivity without compromising hand safety.
01
EN 388:2016 Cut Level 1 certified for reliable light-duty hand protection
02
Thin PU palm coating for enhanced dexterity and precision grip
03
Nylon knitted shell for all-day comfort and breathability
The KARAM HS-33 features a nitrile foam palm coating over a seamless knit liner, delivering reliable grip in both oily and dry conditions. Certified to EN 388:2016 (Cut Level 1) and EN ISO 21420:2020, these gloves meet rigorous international safety standards. Made in India, they are ideally suited for general industrial handling, logistics, and light assembly tasks.
The KARAM HS-52 Cut Protection Gloves are EN 388:2016 Cut Level 4 certified, featuring a high-performance polyethylene (HPPE) fiber shell with a palm coating that delivers extreme cut resistance alongside reliable grip and abrasion protection. Engineered for demanding industrial environments, these gloves provide the dexterity and durability required for sheet metal handling, glass manufacturing, and other sharp-edge operations. Compliant with EN ISO 21420:2020, the HS-52 offers a professional-grade safety solution for workers exposed to severe laceration hazards.
01
EN 388:2016 Cut Level 4 certified for superior cut protection
02
HPPE high-performance cut-resistant fiber shell
03
Palm coating for enhanced grip and abrasion resistance
The KARAM JLT652QR is a complete confined space rescue kit engineered for industrial and municipal rescue operations. All individual components — including the aluminium tripod, rescue winch, and full body harness — are independently EN-certified (EN 795, EN 1496, EN 361) for maximum safety compliance. Ready-to-deploy straight from its dedicated carry bag, this kit delivers reliable performance for manholes, tanks, and other confined space entries.
01
Complete confined space rescue system in one kit
02
All components individually EN-certified (EN 795, EN 1496, EN 361)
03
Includes aluminium tripod, rescue winch, and full body harness
The KARAM NOTL01 is a coiled elastic tool lanyard engineered to prevent dropped object incidents when working at height, keeping hand tools and equipment securely tethered at all times. It connects to a worker's harness D-ring or wrist strap via carabiner and snap hook clips at both ends, ensuring reliable attachment without restricting movement. The coiled elastic design provides full freedom of motion, extending and retracting smoothly to eliminate tangling and reduce fatigue during elevated work.
The KARAM PCGS100FT-R is a 100ft self-retracting lifeline (SRL) with an integrated retrieval winch, designed for both fall arrest and post-fall rescue of suspended workers in a single device. ANSI Z359.14-2014 certified, it delivers instant locking fall protection combined with a built-in winch for safe lowering and recovery. Ideal for confined space entry and elevated work, this dual-function SRL eliminates the need for separate rescue equipment.
01
ANSI Z359.14-2014 certified for reliable fall protection compliance
02
100ft galvanized wire rope for extended reach and corrosion resistance
03
Integrated retrieval winch for safe rescue and recovery of suspended workers
The KARAM PCGS30FT is a 30-foot self-retracting lifeline (SRL) featuring a galvanized steel wire rope housed in a durable polymer casing, certified to ANSI Z359.14-2014 for reliable fall protection. Its automatic retraction mechanism keeps the lifeline taut during movement, while the instant fall-arrest locking system engages immediately upon a fall event. Designed for at-height work across construction, industrial, and maintenance applications, it delivers dependable protection with ease of use.
The KARAM PCGS50FT is a 50-foot galvanized steel wire rope Self-Retracting Lifeline (SRL) engineered for workers operating at height on towers, elevated platforms, and tall structures requiring extended working range. Certified to ANSI Z359.14-2014, it delivers reliable, instant fall-arrest protection with automatic rope retraction to keep the lifeline taut and minimize trip hazards. Built for demanding industrial environments, this SRL combines a durable polymer casing with a swivel top connection for unrestricted 360° movement.
01
ANSI Z359.14-2014 SRL certified for reliable fall-arrest compliance
02
50ft (15m) galvanized steel wire rope for extended working range
03
Automatic retraction with instant fall-arrest locking mechanism
The KARAM PCGS60FT is a 60-foot (~18m) self-retracting lifeline (SRL) featuring a galvanized steel wire rope and ANSI Z359.14-2014 certification, delivering reliable fall arrest protection for demanding at-height environments. Its auto-retract and instant-lock mechanism ensures immediate response in the event of a fall, making it ideal for industrial platforms, masts, and construction applications. Built for durability and compliance, this retractable fall arrester block meets the highest safety standards for professional use.
The KARAM PCGS60FTR is a 60ft self-retracting lifeline featuring an integrated retrieval winch, delivering dual-function fall arrest and post-fall worker retrieval in a single compact unit. Certified to ANSI Z359.14-2014, it provides reliable protection for workers operating at height or in confined spaces. Its robust construction and automatic locking mechanism ensure rapid response to falls, minimizing injury risk and enabling swift rescue.
The KARAM PCGS80FT is an 80-foot (~24m) galvanized steel wire rope self-retracting lifeline (SRL) engineered for reliable fall protection on tall structures, towers, and multi-level industrial facilities. Certified to ANSI Z359.14-2014, it features a self-retracting mechanism that instantly arrests falls, minimizing fall distance and reducing injury risk. Its robust construction and extended reach make it the ideal choice for workers operating at height across demanding industrial environments.
01
ANSI Z359.14-2014 certified for reliable fall protection
02
80ft (~24m) galvanized steel wire rope for extended reach
03
Self-retracting mechanism with instant fall-arrest activation
The KARAM PN21 Full Body Harness is EN 361:2002 certified fall protection equipment designed for reliable safety at height. It features 3 adjustment points and 1 dorsal D-ring attachment point, with adjustable chest and thigh straps plus a sit strap for extended comfort during prolonged use. Manufactured in India to international safety standards, the PN21 delivers dependable performance across a wide range of industrial and construction applications.
The KARAM PN361 Double Energy Absorbing Lanyard (Y-type) is EN 355:2002 certified, delivering reliable fall arrest performance for at-height workers who require continuous connection. Its Y-type dual-leg design enables 100% tie-off, ensuring workers remain connected at all times when moving between anchor points. An integrated energy absorber reduces peak arrest forces, providing enhanced protection and comfort during a fall event.
01
EN 355:2002 certified for reliable fall arrest performance
02
Y-type double lanyard design enabling 100% tie-off at all times
03
Integrated energy absorber reduces peak arrest forces on the body
The KARAM PN361 Double Lanyard with Tower Hook is an EN 355:2002 certified fall arrest lanyard engineered for tower climbers and telecom workers. Constructed from 44mm wide polyester webbing at 1.8m total length, it features a Y-type 100% tie-off design with an integrated energy absorber for continuous protection. Large-opening tower hooks enable secure and versatile attachment to poles and lattice structures.
01
EN 355:2002 certified for reliable fall arrest performance
02
44mm wide polyester webbing for strength and durability
The KARAM PN410 Grip Descender (Jumper) is a precision-engineered aluminium alloy controlled descent device designed for rope rescue, rope access, and confined space operations. It features a lever-operated braking mechanism with an integrated anti-panic function that automatically stops descent if excessive force is applied to the lever, ensuring maximum safety under stress. Compatible with 10–13mm diameter ropes, it delivers reliable, controlled descents in demanding professional environments.
01
Lightweight and durable aluminium alloy construction for long-lasting performance.
02
Lever-controlled descent mechanism for precise and smooth speed management.
03
Anti-panic function automatically stops descent if excessive force is applied to the lever.
The KARAM PN44 is a dual-certified full body harness meeting EN 361:2002 for fall arrest and EN 358:2018 for work positioning, making it a versatile choice for at-height operations across construction, oil and gas, utilities, and industrial sectors. It features a dorsal D-ring for fall arrest, along with lateral and front positioning loops for secure work positioning. Fully adjustable shoulder, chest, and leg straps with durable polyester webbing ensure a comfortable, reliable fit for a wide range of users.
The KARAM PN542 is an EN 397:2012+A1:2012 certified industrial safety helmet featuring a robust high-density polyethylene (HDPE) shell and a 6-point adjustable suspension system for a secure, comfortable fit. Engineered for demanding environments, it delivers reliable head protection across construction, oil & gas, and general industrial applications. Made in India by KARAM Safety, the PN542 combines proven performance with durable, lightweight design.
The KARAM PN56 is a 5 D-ring full body harness carrying triple certification to EN 361:2002 (fall arrest), EN 358:1999 (work positioning), and EN 813:2008 (sit harness), making it one of the most versatile safety harnesses available. Engineered for demanding applications including tower climbing, rescue operations, and confined space entry, it delivers reliable protection across a wide range of industrial and emergency scenarios. Constructed from high-tenacity polyester webbing with padded shoulders and waist, the PN56 combines durability with all-day wearer comfort.
01
Triple certified: EN 361:2002, EN 358:1999 & EN 813:2008
02
5 D-rings: dorsal, sternal, 2 lateral, and rear attachment points
03
Padded shoulders and waist for enhanced all-day comfort
The KARAM PN660 is a professional ascending and descending rescue kit engineered around a 3:1 mechanical advantage rope rescue system, accommodating up to 30 metres of rope for versatile deployment in demanding environments. Built with EN-certified components throughout, it delivers reliable, standards-compliant performance for rope access technicians and rescue teams. Designed for rope access, at-height rescue, and confined space operations, the PN660 provides a complete, ready-to-deploy solution for critical life-safety applications.
01
3:1 mechanical advantage system for efficient rope rescue
02
30m rope capacity for versatile at-height deployment
03
EN-certified components for standards-compliant safety
PN800 Aluminium Tripod is an EN 795 Class B certified overhead anchor point designed for safe confined space entry and rescue operations in manholes, tanks, and vaults. Available in 7-foot and 10-foot heights, its fully adjustable aluminium alloy legs provide stable anchorage on uneven surfaces. Pre-installed double head pulleys and a universal winch mount make it a complete, field-ready solution for professional rescue and retrieval teams.
01
EN 795 Class B certified anchorage point for overhead fall protection
02
Available in 7 ft and 10 ft height options to suit varying confined space depths
03
Fully adjustable aluminium alloy legs for stable setup on uneven surfaces
KARAM PN801 is an EN 1496 Class B certified manual rescue winch designed for safe lowering and lifting of workers in confined space operations. Available with either a 20m or 25m galvanized steel wire rope, it provides reliable and controlled evacuation performance. The PN801 mounts directly to the KARAM PN800 tripod, forming a complete and compliant confined space rescue system.
The KARAM PN9100K is an 11mm dynamic kernmantle rope featuring a high-tensile polyamide core encased in a tightly woven sheath, delivering exceptional tensile strength and superior abrasion resistance. Its robust construction makes it an ideal choice for rope access, rescue operations, and fall protection systems where reliability and durability are paramount. Engineered to perform under demanding conditions, this anchorage line combines lightweight handling with the high-strength performance required by safety professionals.
01
11mm diameter dynamic kernmantle construction for reliable performance
02
High-tensile polyamide core delivers exceptional strength and load capacity
03
Tightly woven sheath provides superior abrasion and wear protection
The KARAM STS01 Suspension Trauma Strap is a vital post-fall safety accessory designed to prevent harness hang syndrome (orthostatic shock) during suspension after a fall arrest. Its foot loops relieve pressure on the leg straps, helping maintain healthy blood circulation while the worker awaits rescue. Compact and easy to attach to existing harness D-rings, the STS01 is an essential addition to any fall protection system.
01
Prevents harness hang syndrome and orthostatic shock
02
Foot loop relieves leg strap pressure during suspension
03
Attaches to existing harness D-rings — no extra hardware
KARAM TPGS100FT is a 100-foot (~30m) galvanized steel wire rope self-retracting lifeline (SRL) engineered for maximum-range fall protection on tall towers, wind turbines, and large industrial structures. Certified to ANSI Z359.14-2014, it delivers instant fall-arrest braking with a self-retracting mechanism that allows workers full freedom of movement at height. Built for demanding environments, this retractable fall arrester block combines a durable polymer housing with a swivel top anchor for versatile, reliable rigging.
01
ANSI Z359.14-2014 certified for compliant, trusted fall protection
02
100ft (~30m) galvanized steel wire rope for maximum working range
03
Instant fall-arrest braking mechanism for rapid, reliable arrest
The KAVACH H-2010-INS Electrical Insulating Rubber Gloves are crafted from premium latex rubber, offering 22kV electrical insulation resistance to keep electricians and electrical maintenance workers safe on the job. Measuring 380mm in length with a full-fingered plain pattern design, these gloves provide comprehensive hand protection and dexterity in demanding environments. Certified to EN 60903 / IEC 903 standards and proudly Made in India, they deliver reliable, internationally recognized safety performance.
The Latex Coated Crinkle Finish Work Gloves feature a green crinkle-finish half-latex palm coating over a white knitted nylon shell, delivering reliable grip in both wet and dry conditions. Engineered for general industrial handling, assembly, and construction tasks, these gloves combine durability with all-day wearing comfort. A practical choice for workers who need dependable hand protection without sacrificing dexterity.
The 16-inch Leather Welding Gloves feature a genuine leather gauntlet design with an extended long cuff, delivering reliable protection against heat, sparks, and spatter during arc welding, MIG/TIG welding, cutting, and foundry operations. Built for demanding industrial environments, these gloves combine durability with comfort to keep hands and forearms safe. Proudly made in Pakistan to meet the needs of professional welders worldwide.
01
Genuine leather construction for durability
02
16-inch long cuff for forearm and wrist protection
Instrument manifold valves designed to connect pressure transmitters and differential pressure instruments to process piping in oil & gas and petrochemical plants. Available in 2-valve, 3-valve, and 5-valve configurations, they feature an SS 316 stainless steel body rated for working pressures up to 420 bar. High-pressure needle valve stems ensure reliable isolation, equalisation, and venting in demanding process environments.
Heavy-duty manual chain hoist (chain block) rated to 1 tonne WLL. Compact, portable, and hand-operated for vertical lifting in workshops, warehouses, and construction sites without requiring power supply.
Robust manual wire rope winch with 500 kg line pull capacity. Features a steel drum, hand crank, and ratchet braking system for controlled, safe lifting, lowering, and pulling of loads.
Metal jacket gasket with a soft filler core encased in a metal outer jacket for heat exchanger covers, pressure vessel manholes, and high-pressure flanges.
Jacket Materials
Soft Iron, Stainless Steel (SS 304 / SS 316), Inconel
The MSA G1 Industrial SCBA is a NFPA 1981 and EN 137:2006 certified self-contained breathing apparatus engineered for industrial firefighting, hazmat response, and confined space rescue. Featuring an integrated heads-up display (HUD) for real-time air monitoring, an advanced air management system, and an ergonomic backframe and harness, the G1 delivers exceptional comfort and situational awareness in the most demanding environments.
The ORYX SH802 Safety Helmet delivers dual-certified head protection, meeting both CE EN397:2000 and ANSI Z89.1:2003 standards for reliable performance across demanding environments. Constructed from high-density polyethylene (HDPE), its robust shell offers excellent impact resistance while remaining lightweight for all-day comfort. Ideal for construction sites, industrial facilities, and general workplace applications where dependable head protection is essential.
The ORYX SH802R Ratchet Safety Helmet features a precision ratchet adjustment headband for a quick, secure fit on any job site. Dual-certified to CE EN397:2000 and ANSI Z89.1:2003 standards, it carries Type I Class E, G, and C ratings to meet a wide range of electrical and impact hazard requirements. Its high-density polyethylene (HDPE) shell delivers reliable protection with a lightweight, durable construction.
01
Ratchet adjustment headband for quick, precise fit
The ORYX SH804R Ratchet Safety Helmet meets ANSI/ISEA Z89.1-2014(R2019) certification with Type I Class E, G, and C ratings, delivering reliable head protection for industrial and construction environments. Its high-density polyethylene (HDPE) shell features UV stabilization for lasting outdoor durability. A built-in ratchet suspension system provides a secure, tool-free adjustable fit for all-day comfort.
A safety-pattern Bourdon tube pressure gauge featuring a phenolic solid-front, blowout-back case engineered for hazardous environments requiring reliable overpressure protection. The blowout-back design safely vents excess pressure away from the operator, making it suitable for ATEX-classified hazardous areas. Available in dial sizes from 100 to 150 mm and pressure ranges up to 600 bar to suit a wide range of industrial applications.
Rack-and-pinion or scotch-yoke pneumatic actuator for quarter-turn valve automation in process and industrial control systems. Features: aluminum alloy body, double-acting or spring-return, ISO 5211 mounting, air supply 4–8 bar, torque output 10–30,000 Nm.
Lightweight and flexible violet polyester round sling rated to 1 tonne WLL. Ideal for lifting delicate or finished surfaces without marking, compliant with EN 1492-2.
Height-adjustable portable gantry crane rated to 1 tonne WLL. Steel A-frame construction with lockable castors for easy repositioning in workshops, garages, and warehouses without the need for a fixed overhead structure.
Industrial Bourdon tube pressure gauge available in glycerin-filled and dry versions for oil & gas, petrochemical, water treatment and HVAC applications.
OIML Class M1 calibrated proof load test weight set totalling 1 tonne. Used for certifying the safe working load of cranes, hoists, and other lifting equipment in compliance with applicable standards.
The Reducing Socket (also known as a reducing coupling) is a threaded pipe fitting designed to connect two pipes of different diameters in a secure, leak-free joint. Available in galvanized iron (GI), carbon steel (CS), and stainless steel (SS 304/316), it accommodates both BSP and NPT thread forms across a size range of 1/8" to 4". Its heavy-duty forged hex body ensures reliable performance in plumbing, industrial, and process piping systems.
Material
Galvanized Iron (GI), Carbon Steel (CS), Stainless Steel SS 304, Stainless Steel SS 316
Thread Type
BSP (British Standard Pipe), NPT (National Pipe Taper)
The Ring Joint (RTJ) Flange features a precision-machined groove designed to seat oval or octagonal metal ring gaskets, providing a reliable metal-to-metal seal for high-pressure oil and gas service in accordance with API 6A. Available in carbon steel and stainless steel 316L, these flanges cover a size range of 1/2" to 24" and pressure classes from 600 to 2500. All products conform to API 6A and ASME B16.5 standards, ensuring suitability for demanding upstream and midstream applications.
The Safeline SL10100 is an EN 361:2002 certified full body fall arrest harness designed for demanding at-height applications including construction, oil & gas, and industrial work. Manufactured in India to international safety standards, it features a dorsal D-ring attachment point, adjustable webbing, and padded shoulders for all-day comfort. A reliable choice for professionals requiring compliant personal fall protection equipment.
01
EN 361:2002 certified full body fall arrest harness
The Safeline SL25100 is an EN 355:2002 certified Y-type forked webbing lanyard designed for 100% tie-off, ensuring continuous fall protection when moving between anchor points. Its integrated energy absorber automatically limits fall arrest force to a maximum of 6kN, significantly reducing the impact on the user's body during a fall. Constructed from durable polyester webbing and fitted with robust steel snap hooks, this lanyard delivers reliable, high-performance protection for work at height.
01
EN 355:2002 certified for reliable fall arrest performance
02
Y-type forked design enables 100% tie-off for continuous protection
03
Integrated energy absorber limits fall arrest force to a maximum of 6kN
Spring-loaded safety relief valve for overpressure protection of pressure vessels, boilers, pipelines, and process equipment. Features: brass, bronze, or SS body, adjustable set pressure, open or closed bonnet, sizes 1/4"–4", set pressure 0.5–700 bar, ASME and PED certified, full-lift design.
Complete range of standard pipe flanges available per PN10/16/25/40, DIN 2501, and ANSI B16.5 class 150/300/600 specifications. Features: CS, SS 304/316/316L, and ductile iron; sizes 1/2"–64"; raised face, flat face, or ring joint; weld neck, slip-on, blind, threaded and lap joint types.
Standards
PN10/16/25/40 (DIN 2501), ANSI B16.5 Class 150/300/600
Materials
Carbon Steel (A105/A350 LF2), SS 304, SS 316, SS 316L, Ductile Iron
The SUN Heavy Duty Chemical Nitrile Rubber Gloves (H-2010-CHEM) are constructed from 0.55mm extra-thick nitrile rubber, delivering superior resistance to a wide range of chemicals and solvents for demanding industrial and laboratory environments. EN ISO 21420:2020 certified and manufactured in India, these gloves provide reliable barrier protection for chemical handling, laboratory work, and heavy-duty industrial applications.
The SUN Heavy Duty Rubber Working Gloves (200g) deliver robust hand protection for demanding industrial, cleaning, and maintenance environments. Constructed from 200g heavy-duty rubber in an XL size, they offer reliable resistance to oils, water, and abrasion. Certified to EN ISO 21420:2020 and manufactured in India, these gloves meet rigorous safety standards for professional use.
Forged steel swivel hook with integrated safety latch and 360° rotating swivel, rated to 1 tonne WLL. Prevents load twist and snagging during lifting operations.
The Threaded End Cap is an internally threaded fitting designed to close and seal the open end of a threaded pipe or fitting in utility and process piping systems. Available in galvanised iron, carbon steel, and SS 316 stainless steel, it accommodates BSP and NPT female thread standards across a size range of 1/8" to 4". Supplied in hex and round body styles with forged or cast construction, it provides a reliable, pressure-rated termination for a wide range of industrial and commercial piping applications.
Material
Galvanised Iron (GI), Carbon Steel (CS), SS 316 Stainless Steel
Thread Standard
BSP (British Standard Pipe), NPT (National Pipe Taper)
Threaded thermowells provide robust protection for temperature instruments against process conditions in pipelines and vessels. Manufactured from SS 304, 316, and 316L stainless steel, they are available with NPT or BSP thread connections and insertion lengths ranging from 50 to 500 mm. Both tapered and straight shank designs are offered, rated for high-temperature and high-pressure industrial service.
Threaded thermowells provide robust protection for temperature instruments against process conditions in pipelines and vessels. Manufactured from SS 304, 316, and 316L stainless steel, they are available with NPT or BSP thread connections and insertion lengths ranging from 50 to 500 mm. Both tapered and straight shank designs are offered, rated for high-temperature and high-pressure industrial service.
A ratchet-type tube cutter designed for making clean, square cuts on stainless steel, copper, and aluminum instrument and process tubing. Suitable for tube ODs from 3 to 50 mm, it delivers consistent, burr-minimised cuts with minimal operator effort. A deburring blade is included for finishing cut ends to installation-ready condition.
The Venus 2400SN95 is a NIOSH-approved N95 cup-style disposable respirator, certified to 42 CFR Part 84, that filters at least 95% of airborne particles to protect workers in industrial, construction, and healthcare environments. Its ergonomic cup-shaped design delivers a secure facial seal for reliable respiratory protection throughout extended wear. Made in India, this respirator combines high filtration efficiency with comfort features suited for demanding professional applications.
Venus E305 Anti-Fog Safety Spectacles are certified to EN 166:2001 and ANSI Z87.1 standards, delivering reliable eye protection for construction, manufacturing, and outdoor environments. Featuring a polycarbonate anti-fog lens available in clear and dark tint options, these spectacles provide UV400 protection and exceptional optical clarity. Made in India by Venus Safety, the E305 combines a lightweight, comfortable frame with adjustable temples for all-day wearability.
01
EN 166:2001 and ANSI Z87.1 certified for reliable eye protection
02
Polycarbonate anti-fog lens for clear, unobstructed vision
03
Available in clear and dark tint options for indoor and outdoor use
The Venus H-5000 is a complete integrated head protection system that combines a safety hard hat, anti-fog polycarbonate face shield, and pivoting earmuffs into a single, streamlined assembly. Engineered for professionals in construction, forestry, utilities, and industrial environments, it delivers simultaneous head, face, and hearing protection without the need for separate accessories. Certified to EN 397 and ANSI Z89.1 standards, the H-5000 ensures reliable, all-in-one safety compliance on demanding job sites.
01
All-in-one assembly integrating a safety hard hat, polycarbonate face shield, and earmuffs
02
Anti-fog polycarbonate face shield for clear, unobstructed vision in demanding conditions
03
Pivoting, adjustable earmuffs for flexible hearing protection when needed
The Venus N95+ Cup Style Respirator is NIOSH 42 CFR Part 84 N95 approved and exceeds the ≥95% filtration efficiency standard, providing reliable protection against industrial dust, aerosols, and airborne particles. Its ergonomic cup-shaped design ensures a secure facial seal for extended wear comfort. Made in India, this disposable respirator is trusted by safety professionals across demanding industrial environments.
The Venus V-420 SLV is an FFP2-class fold-flat respirator certified to EN 149:2009, offering ≥94% filtration efficiency against airborne particles including dust, mists, and fumes. Equipped with an exhalation valve (SLV), it significantly reduces heat and moisture buildup for enhanced breathing comfort during extended wear. Its compact fold-flat design makes it easy to store and carry, making it a reliable and lightweight disposable respiratory solution made in India.
01
EN 149:2009 FFP2 NR certified
02
Exhalation valve (SLV) for enhanced breathing comfort
The Venus V-4410 SL is an EN 149:2009 certified FFP1 NR D class respirator designed to protect against dust, mist, and solid aerosols at concentrations up to 4× the Occupational Exposure Limit (OEL). Featuring a fold-flat C-shape design, it stores compactly and deploys easily, while an embedded nose clip eliminates loose metal parts for added safety and comfort. Manufactured in India to international standards, this lightweight disposable mask delivers reliable respiratory protection for a wide range of industrial and general-purpose applications.
01
EN 149:2009 FFP1 NR D certified respirator
02
Fold-flat C-shape design for compact storage and easy portability
03
Embedded nose clip with no loose metal parts for enhanced safety
The Venus V-7800 ABEK1 Gas Filter Cartridges are a combination filter designed to protect against organic vapors (A), inorganic gases (B), acid gases (E), and ammonia and amines (K) in a single unit. Compatible exclusively with the Venus V-7800 half face mask, these cartridges deliver reliable multi-gas protection in demanding industrial environments. Sold as a pair for complete respiratory coverage.
01
ABEK1 combination filter class for broad-spectrum gas and vapor protection
02
Protects against organic vapors (A), inorganic gases (B), acid gases (E), and ammonia/amines (K)
03
Compliant with EN 140:1999 respiratory protective device standard
The Venus V-7800 is an EN 140:1999 certified half-face elastomeric respirator designed for reliable respiratory protection in demanding industrial environments. It accepts the full range of Venus V-7800 series replaceable gas and particulate filter cartridges, offering versatile protection against a wide spectrum of hazards. Ideal for industrial, chemical, painting, and oil & gas applications, this reusable respirator delivers a secure, comfortable fit for extended wear.
The Venus V-7900 Dual Filter Cartridges are replaceable cartridge pairs designed for use with Venus V-900 and V-7800 series half-face respirators, delivering reliable protection against gases, organic vapors, and combined hazards. Sold as a pair, these cartridges offer a cost-effective maintenance solution for extending the life of your respirator. Manufactured in India to meet rigorous safety standards, the V-7900 cartridges ensure dependable respiratory protection across a range of industrial environments.
01
Compatible with Venus V-900 and V-7800 half-face respirators
The Venus V-900 Half Face Reusable Respirator is an elastomeric half-face mask designed to accept dual V-7900 series replaceable filter cartridges, delivering reliable protection against gases, vapors, and particulates. Ideal for industrial, chemical, and painting environments, it combines a secure silicone face seal with an adjustable head harness for all-day comfort and a dependable fit. Made in India, the V-900 offers a durable, cost-effective respiratory solution for demanding workplace conditions.
01
Half-face elastomeric facepiece for lightweight, durable respiratory protection
02
Dual cartridge bayonet ports compatible with V-7900 series filter cartridges
03
Silicone face seal for superior comfort, flexibility, and a secure fit
The Vertical Pressure Vessel is an ASME Section VIII and PED certified storage vessel engineered for compressed air storage, buffer tank, and industrial process applications. Constructed from a robust carbon steel shell with domed ends, it delivers reliable performance across a capacity range of 100 to 10,000 litres. Pressure ratings span 10 to 25 bar, making it suitable for a wide variety of demanding industrial environments.
Heavy-duty wall-mounted jib crane rated to 500 kg WLL with 180° or 270° slewing arc. For fixed workstation lifting in workshops and production areas where a free-standing gantry is impractical.
The Weld Neck Flange is engineered for high-pressure and high-temperature piping service, featuring a long tapered hub that provides superior stress distribution and structural integrity. It is butt-welded directly to the pipe, creating a seamless, leak-resistant joint ideal for demanding industrial applications. Available in carbon steel (ASTM A105) and stainless steel grades 304, 316, and 316L.
The Welsafe FC45 is a clear polycarbonate face shield visor designed for use with the Welsafe VB-A2 holder bracket, providing reliable full-face protection on safety helmets. Manufactured in Taiwan, it guards against impact, chemical splash, and flying debris, making it an essential piece of PPE for industrial environments. Its high-quality polycarbonate construction delivers outstanding optical clarity while meeting the demands of grinding, chemical handling, and general industry applications.
The Welsafe SS416 Safety Spectacles are dual-certified to EN 166:2001 and ANSI Z87.1 standards, making them a trusted choice for industrial and construction environments worldwide. Featuring impact-resistant polycarbonate lenses with an anti-scratch coating and full UV400 protection, these spectacles deliver reliable eye safety without compromising clarity. Manufactured in Taiwan to rigorous quality standards, the SS416 combines durable performance with a lightweight, comfortable design.
The Welsafe VB-A2 is an adjustable face shield visor holder bracket designed to securely mount the Welsafe FC45 polycarbonate visor onto standard safety helmets. Manufactured in Taiwan to high industrial standards, it features a tilt-adjustable mechanism and quick-attach design for fast, reliable deployment. Ideal for grinding, welding, chemical handling, and a wide range of general industrial face protection applications.
01
Attaches securely to standard safety helmets
02
Compatible with Welsafe FC45 polycarbonate face shield visor
03
Adjustable tilt mechanism for optimal face coverage
Galvanized steel wire rope sling with flemish eye terminations rated to 3 tonnes WLL. Designed for heavy-duty industrial lifting in harsh environments where durability and heat resistance are required.
Y-type pipeline strainer for removing particulate matter from process, HVAC, and water treatment pipelines. Features SS 316/304 or cast iron body, flanged or threaded connections, SS mesh screen 20–200 mesh, blow-down drain plug, sizes 1/2"–16", PN16–PN40.
The ZERUST®/EXCOR® ActivCapsule™ FAC1-1(S) is a drop-in Vapor Corrosion Inhibitor (VCI) capsule engineered for flash-corrosion prevention in enclosed spaces and hard-to-reach areas. Utilising proven ZERUST® VCI technology, it releases a protective vapour that forms an invisible molecular barrier on metal surfaces, halting corrosion at the source. Ideal for use as a standalone solution or as a supplement to other ZERUST® VCI packaging products, it delivers reliable multi-metal protection without direct contact. Trusted by industrial operators across the Gulf and Middle East for safeguarding critical metal components in demanding environments.
Product Type
Vapor Corrosion Inhibitor (VCI) Capsule
Technology
ZERUST® Vapor Corrosion Inhibitor (VCI)
Application Method
Drop-in or hang-in; vapour-phase diffusion — no direct contact required
Zerust Axxanol 707C is a vapor-phase corrosion inhibitor (VCI) concentrate formulated for blending with lubricating oils to protect internal metal surfaces in closed systems. It is engineered for use in internal combustion engines, transmissions, gearboxes, and hydraulic systems, where it releases corrosion-inhibiting vapors into void spaces to form a protective molecular layer on metal surfaces. Purpose-built for demanding industrial environments across the Gulf and Middle East, it delivers reliable corrosion protection against the region's high humidity, extreme heat, and salt-laden air.
Product Type
Vapor-phase corrosion inhibitor (VCI) concentrate
Inhibitor Mechanism
Vapor-phase (VCI) — protects via molecular vapor adsorption on metal surfaces
ZERUST Axxanol 710C is an advanced anti-corrosion oil additive combining Contact Inhibitor and Vapor Corrosion Inhibitor (VCI) technology to deliver comprehensive protection for metal surfaces within closed, lubricated systems. It is engineered for use in internal combustion engines, transmissions, gearboxes, and hydraulic systems, guarding against corrosion in void spaces where conventional lubricants cannot reach. Trusted by industrial operators across demanding environments, it integrates seamlessly with existing oils without requiring system disassembly.
ZERUST AxxaWash NW-10C is a mildly alkaline, water-based preservation cleaner engineered to remove chlorides, oils, metalworking soils, and organic or inorganic contaminants from ferrous metal surfaces. Its advanced flash-rust inhibition technology protects cleaned surfaces from immediate re-oxidation, making it ideal for demanding industrial environments across a wide operating temperature range. Trusted by maintenance engineers and procurement teams in manufacturing, oil and gas, and metalworking industries throughout the Gulf and Middle East region.
ZERUST® ICT® Plastabs® are thin, rigid polyethylene tabs engineered with Vapor Corrosion Inhibiting (VCI) technology to protect metal parts and components from rust and corrosion during storage and transit. The tabs emit a protective vapor that forms an invisible molecular barrier on metal surfaces, requiring no direct contact for effective protection. Ideal for industrial applications across the Gulf and Middle East, where high humidity, extreme heat, and salt-laden air accelerate corrosion risk.
ZERUST® ActivDri™ PWA Packets deliver dual-action protection by combining Vapor Corrosion Inhibitor (VCI) technology with active moisture absorption, safeguarding metal parts, electronics, and electrical components from corrosion and humidity damage. Engineered for demanding industrial environments, these economical packets are easy to deploy in packaging, storage, and shipping applications. Ideal for the Gulf and Middle East region, where extreme heat, high humidity, and salt-laden air accelerate corrosion of critical assets.
Product Type
VCI Desiccant Packet
Action Type
Dual-action: Vapor Corrosion Inhibitor (VCI) + Active Moisture Absorption
Protection Against
Corrosion, rust, humidity, condensation, and environmental contaminants
ZERUST® ActivPak®(LS) VCI Sachets deliver fast-acting vapour-phase corrosion protection for metal components in demanding industrial environments, including oil & gas facilities, marine vessels, power plants, and waste treatment sites. The low-sulphur (LS) formula provides flash corrosion defence during critical exposure windows, making it ideal for the Gulf and Middle East region where high humidity, salt-laden air, and extreme temperatures accelerate metal degradation. Simply place the sachets in enclosed spaces or packaging — no surface contact required. Trusted by industrial procurement teams across the region for reliable, maintenance-free corrosion control.
ZERUST® AxxaClean™ 2048 is a moderate-acting, nonhazardous rust remover that effectively eliminates medium rust and tarnish from hard-to-reach cracks and crevices. It deoxidises and brightens red metals, aluminium alloys, magnesium alloys, and galvanised substrates with consistent, reliable results. With a pH of approximately 2.5, it poses minimal disposal challenges and requires no hazardous waste classification — making it an ideal choice for industrial maintenance operations across the Gulf and Middle East.
ZERUST® AxxaClean™ 3048 is a rapid-acting industrial rust remover formulated to eliminate heavy corrosion and tarnish from ferrous and yellow metals, including in hard-to-reach cracks and crevices. Available in both immersion and brush-on gel formulas, it delivers versatile application across a wide range of industrial cleaning tasks. With a pH of approximately 1, AxxaClean™ 3048 minimises disposal concerns while delivering powerful, fast results in demanding environments.
ZERUST®/EXCOR® Axxanol™ Spray-G is a sprayable rust preventative grease that delivers the protective performance of a traditional grease in a convenient aerosol spray format. Formulated for long-term indoor and outdoor storage as well as demanding overseas shipping applications, it forms a durable yet fully removable coating that shields metal parts, equipment, and assemblies against corrosion. Trusted by industrial operators across the Gulf and Middle East, Axxanol™ Spray-G combines Vapor Corrosion Inhibitor (VCI) technology with a grease-based barrier for comprehensive, multi-environment rust prevention.
Form
Sprayable Grease
Application Method
Spray
Protection Type
Rust Preventative with Vapor Corrosion Inhibitor (VCI)
The ZERUST® ICT® Tube Strip Pro is a flexible solid-core plastic VCI tube engineered with ZERUST® Vapor Corrosion Inhibitor (VCI) Technology to deliver reliable, long-lasting corrosion protection in enclosed and confined spaces. It is specifically designed to protect bolt thread holes, hollow car chassis frames, confined electronic spaces, tubes, pipes, gun barrels, and other hard-to-reach cavities where conventional rust prevention methods cannot reach. Trusted by industrial, automotive, and defense sectors across the Gulf and Middle East, it provides effective protection without direct contact with metal surfaces.
ZERUST® ICT®510-C Multimetal VCI Film delivers cost-effective Volatile Corrosion Inhibitor protection for both ferrous and non-ferrous metals, making it ideal for industrial shipping and long-term storage across the Gulf and Middle East region. Available in rolls, sheets, tubing, and bags, it provides a versatile and reliable barrier against corrosion without the need for oils or greases. Trusted by manufacturers and distributors worldwide, ICT®510-C simplifies packaging workflows while safeguarding metal components throughout the supply chain.
The ZERUST® ICT®510-OPS is an 8-mil, high-strength polyolefin shrink film engineered with integrated Volatile Corrosion Inhibitor (VCI) technology and UV stabilisers for reliable long-term outdoor preservation of large industrial assets. Designed to withstand harsh environmental conditions, it delivers continuous corrosion protection to metals including steel, iron, copper, and aluminium without direct contact. Ideal for oil & gas, petrochemical, military, and heavy equipment applications across the Gulf and Middle East region.
ZERUST® Inhibitor Fusion (ZIF) Tape delivers long-term corrosion protection for exposed and insulated industrial assets including flanges, valves, and piping systems. Engineered with advanced VCI (Vapour Corrosion Inhibitor) fusion technology, it forms a durable protective barrier that actively prevents rust and corrosion even in the demanding heat, humidity, and saline conditions of the Gulf and Middle East. Ideal for oil & gas, petrochemical, water treatment, and infrastructure operators seeking to reduce unplanned downtime and costly asset failures.
Application Method
Hand-applied spiral wrap; no specialist tools or surface coatings required
ZERUST®/EXCOR® VCI Vapor Capsules are portable, self-contained capsules that harness proven ZERUST® Vapor Corrosion Inhibitor (VCI) technology to deliver continuous, invisible corrosion protection. Designed for hard-to-reach areas inside control panels, electrical cabinets, switchgear, and other enclosed spaces, they release corrosion-inhibiting vapors that form a protective molecular layer on metal surfaces — even while equipment remains energised and in operation. Ideal for the demanding humid and salt-laden environments of the Gulf and Middle East, these capsules provide long-lasting, maintenance-free protection without the need for direct surface contact or disassembly.
ZERUST® ZerioGuard® 5 is a soluble corrosion inhibitor (SCI) powder formulated to protect ferrous metals during hydrotesting operations. When dissolved in hydrotest water, it creates an alkaline environment that neutralises acidic species, significantly reducing the risk of flash corrosion on internal metal surfaces. Effective at low concentrations, it delivers reliable corrosion protection for pipelines, pressure vessels, and storage tanks across oil and gas, petrochemical, and industrial applications.
ZERUST® Zeriol® MCO-35 is a ready-to-use, oil-based corrosion preventive that forms a clear, thin oily film to protect ferrous, non-ferrous, and multimetal surfaces in the demanding humid, salt-air, and marine environments common across Gulf and Middle East industrial operations. Engineered for oil and gas fabrication, storage, and export applications, it delivers reliable corrosion inhibition alongside practical lubricity that facilitates safe handling, inspection, assembly, and disassembly throughout the supply chain. The formulation is free of barium and heavy metals and complies with TSCA, RoHS, REACH SVHC, and Global Automotive Declarable Substance requirements, supporting procurement teams with robust environmental and regulatory credentials.
ZERUST® Zerion™ FVS is a dual-action corrosion inhibiting powder that combines Vapor Corrosion Inhibitor (VCI) and Soluble Corrosion Inhibitor (SCI) technologies in a single formulation, providing comprehensive protection in environments where both vapor spaces and water ingress are present. Engineered for demanding industrial applications, it neutralises corrosive contaminants introduced by moisture while simultaneously delivering VCI protection throughout enclosed vapor spaces. Zerion™ FVS is the preferred choice for oil and gas, marine, pipeline, and heavy industrial storage applications across the Gulf and Middle East region.
ZERUST® Zerion™ FVS-DB is an advanced corrosion inhibitor engineered to protect the external surfaces of aboveground storage tanks (ASTs), underground storage tanks (USTs), and buried vessels in contact with sand pads and backfill materials. By delivering sustained vapour-phase and contact inhibition directly at the metal-soil interface, it significantly extends asset service life and reduces maintenance costs. Purpose-built for the demanding conditions of Gulf and Middle East industrial environments, FVS-DB offers reliable protection against the accelerated corrosion driven by saline soils, high humidity, and extreme temperature cycles.
Product Type
Vapour-phase and contact corrosion inhibitor (VpCI®)
Primary Application
External corrosion protection of ASTs, USTs, and buried vessels at sand pad and backfill interfaces
Compatible Substrates
Carbon steel, mild steel tank floors and external vessel surfaces
ZERUST® Zerios® WUV-25 is a high-performance corrosion preventive coating engineered to protect steel assets in demanding outdoor and industrial environments, including the extreme heat and humidity of the Gulf and Middle East. It forms a durable, transparent amber film that is dry to the touch, allowing visual inspection of coated surfaces without the need for removal. Delivering up to 2 years of outdoor corrosion protection and several years under sheltered or indoor storage conditions, WUV-25 is easily removed when maintenance or processing is required.
ZERUST® ZerioTec® Fog MV is a ready-to-use, water-based Vapor Corrosion Inhibitor (VCI) liquid engineered for fogging and spray applications inside hermetically sealed or sealable enclosures. Its advanced VCI chemistry vaporises to form an invisible molecular protective layer on metal surfaces, halting corrosion without direct contact. Formulated for the demanding conditions of Gulf and Middle East industrial environments, it delivers reliable long-term protection for pipelines, storage tanks, enclosed equipment, and shipping containers. The water-based, low-VOC formula ensures safe handling and compliance with stringent environmental and workplace safety standards.
ZERUST®/EXCOR® Axxatec™ 8110C is a water-based corrosion-inhibiting additive engineered to protect interior surfaces and components made of iron, steel, aluminium, copper, and brass within closed systems. Designed for hydraulic and coolant equipment including heat exchangers, industrial plate-chillers, and fire sprinkler systems, it delivers reliable corrosion protection for up to one year. Its easy-to-use liquid formulation makes it an ideal choice for Gulf and Middle East industrial operations where heat, humidity, and demanding service conditions accelerate metal degradation.
Available
